GPC/SEC injection systems

The SECcurity GPC1260 offers injection systems for a variety of tasks, ranging from general GPC/SEC needs up to dedicated solutions for higher sample throughput or semi-preparative separations. All modules are designed for quick startup, automated validation and ease of use.

manual injector	P/N 404-0114
standard autosampler	P/N 404-0104
thermostatted autosampler	P/N 404-0105

SECcurity manual injector

SECcurity GPC1260 manual injector with mounting plate

Convenient modular accessory, dimensioned to match the footprint of the SECcurity GPC1260. Stack to create a compact, affordable manual injection GPC/SEC system. Equipped with 100µL samle loop and position sensor. Sample loops from 20µL to 1mL are also available.

Part number: 404-0114
Request a quote and product information

SECcurity standard autosampler

SECcurity GPC1260 standard autosampler for up to 100 vials

The SECcurity GPC1260 standard autosampler is designed for the reliability, safety, and ease of use needed in (pharmaceutical) routine tasks and quality control, as well as for R&D tasks.
Injection with highest precession allows reliable detection and evalulation with molar mass sensitive detectors and concentration detectors alike.

The standard autosampler can be upgraded from non-thermostatted version to thermostatted version by adding the thermostat P/N 404-0142.

A 900µL enhanced injection volume kit P/N 409-9015 for semi-preparative systems is available.

Specifications
Injection range	0.1- 100 µL in 0.1 µL increments Up to 1500 µL with multiple draw (hardware modification required)
Precesion	<0.25% RSD from 5-100 µL, <1% from 1-5 µL, variable volume
Sample viscosity range	0.2 - 5 cp
Sample capacity	100 × 2-ml vials in 1 tray 40 × 2-ml vials in ½ tray
Injection cycle time	Typically 50 s depending on draw speed and injection volume
Carry-over	Typically < 0.1 %, < 0.05 % with external needle cleaning
Pressure operating range	0-60 MPa (0-600 bar, 0-8702 psi)
*900µL metering device installed*
Injection range	0.1 - 900 µL in 0.1 µL increments (recommended 1 µL increments) Up to 1800 µL with multiple draw (hardware modification required)
Precission	Typically < 0.5 % RSD of peak areas from 5 - 2000 µL Typically < 1 % RSD of peak areas from 2000 - 5000 µL Typically < 3 % RSD of peak areas from 1 - 5 µL Variable volume
Sample viscosity range	0.2 - 5 cp
Sample capacity	100 × 2-ml vials in 1 tray 40 × 2-ml vials in ½ tray
Injection cycle time	Typically 50 s depending on draw speed and injection volume
Carry-over	Typically < 0.1 %, < 0.05 % with external needle cleaning
Pressure operating range	0-20 MPa (0-200 bar, 0-2950 psi)
GLP/Compliance	Early maintenance feedback (EMF) for continuous tracking of instrument usage with user-settable limits and feedback messages. Electronic records of maintenance and errors, automated OQ/PV procedures.

Part number: 404-0104
Request a quote and product information

SECcurity thermostatted autosampler

Standard autosampler with thermostat for samples requiering defined temperature conditions.

Specifications: see standard autosampler.

Part number: 404-0105
Request a quote and product information

< Back to LC Intruments and Detectors

Polefin HT-GPC Columns

For HT-GPC separations, applicable wíth light scattering detectorsmore

Training dates 2012

GPC/SEC training courses and educational webinarsmore

WinGPC UniChrom + ChromPilot released

New GPC/SEC software with controls for PSS, Agilent, Shimadzu, Dionex and moremore

PSS - Polmer Standards Service

Expertise and Reliability for every step of Polymer Characterization