GPC/SEC components
Unsurpased performance and stability with GPC/SEC dedicated solutions.
GPC/SEC column compartments
|
P/N 404-0111 | |
|
P/N 404-0137 | |
|
P/N 409-0001 |
GPC/SEC fraction collector for semi-preparative systems
|
P/N 409-0005 |
GPC/SEC system control
|
P/N 404-0136 | |
|
P/N 400-1010 |
SECcurity column compartment
Column compartment 80°/100°
The SECcurity GPC1260 thermostatted column compartment 80°/100° fits in a single stack for lowest bench space requirements. Two versions are available: the thermostatted column compartment for temperatures up to 80° C and the version for temperatures up to 100° C. Three full-length, 30-cm columns fit inside the column racks. Optional column switching valve can be included.
|
Specifications | |
|
Temperature range |
10 degrees below ambient to 80° C/100° C |
|
Temperature stability |
± 0.15° C/± 0.05 °C |
|
Temperature accuracy |
± 0.8° C with calibration ± 0.5° C |
|
Column capacity |
three 30-cm columns |
|
Heat-up/cool-down time |
5 min from ambient to 40° C |
|
GLP/Compliance |
Electronic records of maintenance and errors, automated OQ/PV procedures. |
Part numbers:
Thermostatted column compartment 80°: 404-0111
Thermostatted column compartment 100°: 404-0137
Request a quote and product information
Column compartment TCC6000
In additon SECcurity GPC1260 supports a column compartment for more than three columns or easier column handling. The SECcurity TCC6000 offers a spacious column rack and can be equipped with a manual injection valve or a column switching valve.
|
Specifications | |
|
Temperature range |
5° C to 85° C |
|
Temperature drift |
< 0.1° C / 24 h |
|
Temperature accuracy |
± 0.1° C |
|
Column capacity |
up to six 30-cm columns |
Part number: 409-0001
SECcurity fraction collector
The SECcurity GPC1260 fraction collector is designed for optimized fraction collection capability without compromises. It is suitable for microtiter plates, test-tubes and bottles and comes with a standard rack for 120 test tubes with 12-18 mm diameter. Fractionation is programmable locally at the fraction collector by:
- time
- peak (window, drift, slope)
- drop volume (built-in drop counter)
or using the WinGPC Unity software control. The fraction collector supports different sized collection vessels. Large volume vessels can be set when the standard rack lid is removed.
Part number: 409-0005
Request a quote and product information
SECcurity system control
SECcurity Controller
The SECcurity controller gives you complete control, system monitoring, signal plotting and diagnostic capabilities for a virtually unlimited number of LC system modules without the need of a PC. Complete local control and monitoring of an entire system, or a single module are available from a single point. Transfer and archiving of methods, sequences and logbooks via standard USB memory sticks. GLP - System logbook and module log-books record errors, unusual events and maintenance activities for GLP traceability.
Part number: 404-0136
Request a quote and product information
WinGPC Unity MCDS with SystemPilot
The SECurity GPC1260 system can be controlled via WinGPC Unity SytemPilot software module. The connection between WinGPC Unity and SECcurity is either locally via the SECcurity RS232 port or (with more flexibility) via network/LAN. The network/LAN solution requires one TCP-IP card P/N 404-0125 per system.
Part number SystemPilot: 400-1010
Request a quote and product information